DALVAZZA
2.5mm Distal Ulna System

DALVAZZA

2.5mm Distal Ulna System

The DALVAZZA 2.5mm Distal Ulna Plate

1

2

3

4

5

POINTED HOOKS

To fit the ulnar styloid

PRECONTOURED SHAPE

To fit the distal ulna

KIRSCHNER WIRE HOLES

For preliminary plate fixation

OBLONG HOLE

Allowing precise positioning of the plate

TIC™ HOLES

Variable angle locking holes (15° angulation)

THE DALVAZZA

plate

57mm length

“The Dalvazza Distal Ulna Plate is a highly appreciated addition to the Salgina Distal Radius Plate. The Dalvazza hooks nicely to the ulna styloid and together with the Salgina serves to handle most of the distal forearm fractures with just one instrument set.”

Viviane Steffen, MD

Head of Upper Extremity, Department of Orthopaedics,

Bürgerspital Solothurn, Switzerland

bridge

PARTNERS IN WRIST FIXATION

src

Distal ulna fractures seldomly come without a fracture of the distal radius. Therefore DALVAZZA and SALGINA share the same screw diameter, allowing you to treat both areas with one simplified and user friendly instrument and screw set.

ANCHOR AND COMPRESS

src

In addition to capturing ulna styloid fragments with DALVAZZA's low profile distal hooks, make it your anchor to achieve interfragmentary compression by using the oblong hole.

VARIABLE ANGLE

src

Seven screw holes offer the choice to position screws where you need them. The flexibility of the TIC™ system allows you to target fragments with the freedom to vary screw angles up to 15° from the nominal trajectory.

PARTNERS IN WRIST FIXATION

Distal ulna fractures seldomly come without a fracture of the distal radius. Therefore DALVAZZA and SALGINA share the same screw diameter, allowing you to treat both areas with one simplified and user friendly instrument and screw set.

ANCHOR AND COMPRESS

In addition to capturing ulna styloid fragments with DALVAZZA's low profile distal hooks, make it your anchor to achieve interfragmentary compression by using the oblong hole.

VARIABLE ANGLE

Seven screw holes offer the choice to position screws where you need them. The flexibility of the TIC™ system allows you to target fragments with the freedom to vary screw angles up to 15° from the nominal trajectory.

THE DALVAZZA 2.5MM INSTRUMENT SET

toolstoolstoolstoolstoolstoolstools
slide-img

Torque Limiting Screwdriver Handle ø2.5mm

Provides a tactile and audible ‘click’ to confirm final tightening of 2.5mm VA Locking screws.

3.5MM SCREWS

screw1screw2

More Bonebridge products